Stiles Food Equipment

0

No products in the cart.

0

No products in the cart.

Food Equipment

  • Stiles Food Equipment
  • Products
  • Food Equipment
  • Roll-In C40
    • Pass Through C42 Shock Freezer/Blast Chiller

    Roll-In C40

    Blast Chillers & Shock Freezers

    Fast, effective and safe

    Piper’s Blast Chiller/Shock Freezer is an indispensable kitchen appliance for forward-thinking businesses. The stainless steel freezer offers soft and hard chilling for light and dense products, indirect air flow, shock freezing capability with air as low as -40°F, integrated sterilization and is P.C. compatible / NAFEM data protocol compliant. Only Piper’s equipment has the advantage of FoodSafeTM technology-ensuring cold food is kept below 40°F to prevent bacterial growth and ensure HACCP compliance (Hazard Analysis Critical Control Point).

    Considering many foods are prepared in advance, a Blast Chiller/Shock Freezer is essential for saving time, energy, preserving quality and enhancing efficiencies.

    Product Brand

    Reach-Ins

    Gruppo Rist Pipe

    Only Piper’s equipment has the advantage of FoodSafe technology and certification. This ensures that your food is kept “out of the DANGER-ZONE.” Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F “DANGER-ZONE.”

    Since there is no simple way of knowing when the degree of contamination has risen to an unsafe level, chilling or freezing food rapidly is the only FoodSafe answer. FDA & HACCP regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish.

    Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens. Nothing does it better than FoodSafe.

    Details

    General Features

    • Monoblock construction

    • Outside side-panels and top in stainless steel (Scotch-Brite satin-finish)

    •Insulated stainless steel door with Scorth-Brite satin finish

    • Inside bottom die-formed leakproof

    • Insulation in high-density (93 lbs) expanded polyurethane,

    • 2.36" thick, HCFC-free

    • Copper evaporator coil with aluminum fins protected against corrosion with an electronically applied epoxy paint 20 microns thick

    • Copper condenser with aluminium fins at high thermic efficiency

    • Anti-condensation heating element in the body, below the magnetic gasket

    • Full length ergonomic handle and magnetic gasket on all four sides of the door

    • Stainless steel feet 2.25" diameter with adjustable height from 3"-5.25"

    • Self-closing door locking in open position at 100°.

    • Heated core probe standard (in blast freezers) for easy extraction

    • Electro-Fin (coating to protect fins from corosion)

    Internal Fitting

    • Shelves slot-in supports made of stainless steel, extractable without using any tools for easy internal cleaning. Interstep between the slides 3.15"

    Cooling Unit

    • Hermetically sealed compressor

    • Evaporator fitted with high flow rate fan for maximum cooling efficiency

    • Ecological refrigerant R404A.

    • Manual defrosting device and evaporation system of water condensation without electrical energy

    Twister Basic
    Twister Basic
    Capacity and cutting technology

    • Basic model from the TWISTER family

    • Cutting capacity: up to 2,000 kg/h / 4,409 lbs

    • High output rate for cutting due to long cutting chamber (550 mm / 21 7/10")

    • Flexibility and strong performance thanks to choice between continuous and intermittent cutting

    • Best cutting quality through AVS and DHS

    Economic efficiency

    • Particularly cost-effective solution for perfect cutting quality in the mid-range performance class

    • Ergonomic, one-hand operating system for the closing of the product loading chamber

    • Optimum product compression due to automatic pre-pressing (AVS)

    Cleaning and operator comfort

    • Consistently ergonomic, even for cleaning

    • Easy access to all machine parts for cleaning

    • Gridset changes require no tools, thanks to the "Click&Go" grid set

    • A hygiene cylinder keeps the cutting chamber clean (optional)

    $100.00
    Brand: Request a Quote
    Divider StartUp
    Divider StartUp
    Your benefits at a glance

    • Product flexibility: Slicing at premium level – no conversion for product changes

    • Mobility: Demand-based installation thanks to low weight and easy transport

    • Low maintenance effort

    • Fast and easy cleaning thanks to the proven premium hygiene design

    • All benefits of the proven slicer generation from TREIF: even more power and dynamics in the drives, even shorter ancillary times, maximum process reliability, more capacity, more flexible reactions to customer requests

    • Also ideal for processing vegetarian products

    • Simultaneous slicing of multiple products – even different types

    • Convenience: user friendly software with touch display

    $100.00
    Brand: Request a Quote
    3334SS-4003FH (Fixed Head)
    3334SS-4003FH (Fixed Head)
    Construction

    • Heavy duty stainless steel base, legs, fixed head, and door structures

    Standard Features

    • Two saw blades

    • Operation and safety manual

    • Safety wall poster

    • End cut safety pusher plate

    • Warranty registration card

    Blade Wheels

    • 16” (40.6 cm) cast iron, chrome nickel plating, upper wheel assembly lifts out

    $100.00
    Brand: Request a Quote
    B350M Gravity Feed manual Slicer
    B350M Gravity Feed manual Slicer
    Construction

    • Body- Anodized Polished Aluminum Cast with Non-Corrosive Metal Frame

    Standard Features

    • Automatic spring loaded belt tensioning

    • Polygroove belt drive provides optimum performance

    • Blade protective ring guard prevents exposed blade edge during cleaning

    • Tilt-away product table lockout prevents thickness gauge from being opened during cleaning

    • Thermal overload/no volt release prevents accidental turn on after power outages

    • Green pushbutton on-off control and Red e-stop button

    • Water resistant IP 65 motor, wiring harness, electronic controls & connectors

    • Detachable sharpener assembly – helps provide hygienic slicing area

    • Product fence – for use on narrow products

    • 6-1/2′ Power Cord with 60 Hz – 115V

    • 3 prong molded plug – No plug on 50 Hz

    $100.00
    Brand: Request a Quote

    You may also like…

    Reach-In 124 (End Load)
    Reach-In 124 (End Load)
    Project Features

    • Only Piper's equipment has the advantage of FoodSafe technology and certification. This ensures that your food is kept "out of the DANGER-ZONE." Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F "DANGER-ZONE." Since there is no simple way of knowing when the degree of contamination has risen to a level which could result in illness or death, chilling or freezing food rapidly is the only FoodSafe answer. FDA and HACCP Regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish. Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens. Nothing does it better than FoodSafe

    Cooling Unit

    • Hermetically sealed compressor

    • Evaporator fitted with high flow rate fan for maximumcooling efficiency

    • Ecological refrigerant R404A

    • Manual defrosting device and evaporation system of water condensation without electrical energy

    Internal Fitting

    • Stainless steel 18/10 glide supports joint fixed in the sides of the cooling compartment.

    • Distance between the slides couples is 2.56"

    • Manual defrosting device and evaporation system of water condensation without electrical energy

    $100.00
    Brand: Request a Quote
    Pass Through C83
    Pass Through C83
    General Features

    • Outside stainless steel Scotch-Brite finish

    • Inside stainless steel with rounded corners

    • Inside bottom and floor die-formed leakproof

    • Insulation in high-density (93 lbs approx.) expanded polyurethane CFC and HCFC-free, thickness 3.15"

    • Copper evaporator coil with aluminum fins protected against corrosion with an electronically applied epoxy paint 20 microns thick

    • Anti-condensation heating element fitted on the door under the gasket

    • Horizontal ergonomic handle with inside security lock

    • Nr. 2 Doors with rubber sweeper gasket with closing hinges

    • Heated core probe in blast freezer for an easy extraction

    • Door with lock
    • Electro-Fin (coating to protect fins from corosion)

    Internal Fitting

    • Internal bumpers in stainless steel to prevent damage by trolleys

    • External guards in stainless steel to prevent damage to control panel

    Cooling Unit

    • Remote condensing unit and the possibility to have stainless steel protective cover

    •Evaporator fitted with high flow rate fan for maximum cooling efficiency

    • Ecological refrigerant R404A

    $100.00
    Brand: Request a Quote
    Pass Through C42
    Pass Through C42
    General Features

    • Outside stainless steel Scotch-Brite finish

    • Inside stainless steel with rounded corners

    • Inside bottom and floor die-formed leakproof

    • Insulation in high-density (93 lbs approx.) expanded polyurethane CFC and HCFC-free, thickness 3.15"

    • Copper evaporator coil with aluminum fins protected against corrosion with an electronically applied epoxy paint 20 microns thick

    • Anti-condensation heating element fitted on the door under the gasket

    • Horizontal ergonomic handle with inside security lock

    • Nr. 2 Doors with rubber sweeper gasket with closing hinges

    • Heated core probe in blast freezer for an easy extraction

    • Door with lock

    • Electro-Fin (coating to protect fins from corosion)

    Internal Fitting

    • Internal bumpers in stainless steel to prevent damage by trolleys

    • External guards in stainless steel to prevent damage to control panel

    Cooling Unit

    • Remote condensing unit and possibility to have stainless steel protective cover

    • Evaporator fitted with high flow rate fan for maximum cooling efficiency

    • Ecological refrigerant R404A

    $100.00
    Brand: Request a Quote
    Reach-In 012 (End Load)
    Reach-In 012 (End Load)
    Project Features

    • Only Piper's equipment has the advantage of FoodSafe technology and certification. This ensures that your food is kept "out of the DANGER-ZONE." Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F "DANGER-ZONE." Since there is no simple way of knowing when the degree of contamination has risen to a level which could result in illness or death, chilling or freezing food rapidly is the only FoodSafe answer. FDA and HACCP Regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish. Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens. Nothing does it better than FoodSafe

    Electrical Control Board

    • Electronic control board equipped with display, which shows the status of the appliance in every moment.

    • The microprocessor is able to memorize till 100 programs.

    • The "T" electronic control can memorize eventual alarms, and can control up to 4 core probes or 4 sensors Defrosting with activation of an electric heating element fitted on the evaporator

    • Compressor protected by overload cut-out with automatic reset Microswitch cuts out the evaporator fan and compressor when the door is opened.

    Internal Fitting

    • Stainless steel 18/10 glide supports joint fixed in the sides of the cooling compartment.

    • Distance between the slides couples is 2.56"

    • Manual defrosting device and evaporation system of water condensation without electrical energy

    $100.00
    Brand: Request a Quote