Watanabe

• Much more safety, Much more sanitation
One unit of blade cover and blade support plate, which contribute to much more safety. From blade drive part to the thickness plate drive part becomes one unit.

• From thin slice to thick slice
It can adjust slice thickness from 0mm to 25mm, and be able to cut the meat with many kinds of thickness.

• A Pioneer in Frozen Meat Slicers.
A longtime seller with reliability and results!
The most powerful machine in the food processing machine industry!

•HIGH SANITARINESS STANDARD
With high standard design, it can be saved a lot of time for a cleaning by using water splash.

•SMOOTH AND EASY OPERATION
It uses just 1 knob to control a slice speed and will stop a meat carriage always at front.
It is achieved for "smooth and silent".
Improved a thickness adjustment design.
Using a powered V-belt for blade rotation.
Operation a meat carriage by Inverter.

• SLIM BUT GOOD STABILITY
It stays a powerful operation with a slimmed body. At a max speed 66 pcs/min with 20kg in meat carriage, it gives you a remarkable stability.

• SAFETY
It works in high safety by the original designed operation lever and emergency stop button. The operational electricity is designed with a low voltage.

• Improved slice quality
Outstanding better operation efficiency. The finest accuracy and the most artistic slice edge in the world.

• Safety system
Not only the interlock system but also the safety device to detach the blade (Option) and safety sensor give you more safety operation.

• More product yield
Less meat dust inside of the blade cover. The new meat catcher achieves less slice loss, the least is 20mm. Modify it 20, 30 or 40mm depending on the products without any tools.

• Slice capacity
The maximum is 380 slices/min. is available.

• Meat catcher system
Sliced productions are 'caught' by the air pressure drive. This helps to decrease more labor costs.

• With conveyor
The conveyor can be attached to the outlet port. It will contribute to the automation line.

• Scattering stopper
The scattering and curls are refrained from the beginning to the end of the slice. The small meat is also possible to be sliced without any slippage.

• Safety construction for all the operators.
1. All covered infeed/outfeed, and interlock system for the cover, when it is run. All accesses are shut out.
2. Also the electrical safety is insured.

• Improved slice quality
Outstanding better operation efficiency. The finest accuracy and the most artistic slice edge in the world.

• More product yield
Less meat dust inside of the blade cover. The new meat catcher achieves less slice loss, the least is 20mm. Modify it 20, 30, or 40mm depending on the products without any tools.

• Slice capacity
The maximum is 380 slices/min. is available.

• Safety system
A heavy blade is easy to detach with the safety blade detaching device.
Easy to clean the blade and the mainframe.

• Smart division
Use edge meat effectively by smart division function. Maximize product yield.

• Easy-to-operation & simple touch panel
The operation item is able to be set in the program. Everyone can operate easily. The machine can operate both "Dice cut mode" and "Slit cut mode" It helps to make a variety of products.

• Blade cassette
1st cut can adjust by replacing the blade cassette. (Changeable from 10mm pitch by 5mm increments) 2nd cut can adjust by touch panel.

• Safety
Interlock systems are used for all covers. Reminders from the interlock systems can be chacked by a touch panel for your safety.

• Hygiene
Blade and conveyor belt are able to disassemble. The machine can be washed down.

• Our new standard
Easy to keep cleaning for wide space around blade.

• More hygiene
Proceed NX is cleaning friendly machine.

• The blade is entirely covered
The blade cover is very safety, the sharp circular blade is all covered.
Just open the cover to grind the blade easy and safety system.

• Detachable grinder unit
No more dirty Grinder unit! Grinder units can be detached and kept in the main body.
Newly designed grinder unit is now easy for everybody. No more irritating adjustment of the unit.

• The emergency stop by the safety lever with interlock
A lever with a safety lock system safely starts the locking system with a equipped emergency stop button.

• Technology ①
The minced line is separated into blocks and pressed by both sides after the slice.

• Technology ②
Small products can be processed, even.

• Operation
A simple screen offers several different functions. Anyone can operate easily.

• Sanitary
Only 1 minute to remove parts for cleaning. Easy cleaning by water resistance design.

• Safety
Inter-Lock system brings perfect safety. You can check the warning on the LCD panel.

• Operation
Automatic operation with touch screen control.

• Quality forming
Hydraulic cylinder is controlled by the characteristics program. Easy to control the forming quality.

• Safety
Safety light curtains are installed for safety.

• Hygine
All stainless steel made. Forming mold parts are washed down.

• More production efficiency
Large-sized infeed is newly designed. (W360mm X H200mm X L1,200mm) It can feed two products at one time. Max slice speed is 300 slices/min.

• More quality promised
Upper feeding rollers grip the product tightly for stable slicing. More accurate thickness.

• Hygiene
Upper feeding rollers are able to disassemble. The chain (drive part) never touches the product. Machine, especially around the slicing position can be washed down. Every part can disassemble. (About 30 mins for cleaning up with 2 operators.)

• Hygiene
Machine, especially around the slicing position can be washed down, leading to the shortening of the cleaning time.(About 30 minutes for cleaning up with 2 operators.)

• Safety
Interlock systems are used for all covers. Reminders from the interlock system can be checked by a touch panel for your safety.

• Other devices
* Meat detecting sensor
Gives you an alert, when the sliced products are getting smaller.
* Pneumatic grinder unit

• The full value of high production efficiency
A large-sized inlet meat tank is newly designed (W320mm x H185mm). Flexible upper feeding conveyors grip the product tightly for stable slicing.

• Believing in our quality
Keeping the blade in the best condition is the most important point to slice products beautifully. Semi-auto resharpening system helps you to keep it in great condition.

• Easy-to-use and simple touch panel
Recommended values for popular items have been already set in the program. Easy to get best settings even for beginners. Different conditions for each product can be surely registered.

• Hygiene
Machine, especially around the slicing position can be washed down, leading to the shortening of the cleaning time.(About 30 minutes for cleaning up with 2 operators.)

• Safety
Interlock systems are used for all covers. Reminders from the interlock system can be checked by a touch panel for your safety.

• Saving the running cost
The blade has been improved day by day. The circular blade can be used for a long time and no need to change it often. Economical and eco-friendly machine.

• Feeding conveyer
Width 300mmm height 150mm feeding conveyer can have more waiting products and easy feeding operation.

• Sharper slice! and less slice loss!!
Meat feeding and blade part are retrofitted. Products are held in good. Also, more accurate feeding gives the sharper slice. Less slice loss is the result of the blade part.

• Safety
It is easy to use with our simple design. The interlock system promises your safety. It is safe and easy to remove/re-assemble the blade with a special cover.

• Sanitary engineering
The slicing part can be washed down. It gives you less cleaning time.

• Simple control
Color touch screen, Easy operation and item data can be saved.

• Safety interlock system
There are interlock systems for every opening/closing part. All of the conditions can be visible with the control screen.

• Simple control
The touch screen setting is only to set the weight. No mold change for setting portioning weights.
(e.g. 80g, 95g, 103g, 122g)

• Non-stop slice mode
After setting the weight, only a pushing the start switch is needed. Then you can continue to feed the product for the continuous slice operation.

• Newly invented weight control system
The mold is with Watanabe's special new press system. meats fit perfectly. This gives accurate weight control.

• Slice capacity
The maximum is 380 slices/min. is available.

• Patented scissors cutting system
Watanabe's characteristic cutting system gives beautiful products.

• Safety control
With World 1st class interlock system, the best safety is promised.

• Hygiene
Wash down the machine. Easy to detach the parts without tools, even the special lif comes with for detaching the mold. Parts trolley comes with. Cleaning guidance is programed, everybody can clean easily.

• Simple control
The touch screen setting is only to set the weight. No mold change for setting portioning weights.
(e.g. 80g, 95g, 103g, 122g)

• Non-stop slice mode
After setting the weight, only pushing the start switch is needed. Then you can continure to feed the product for the continuous slice operation.

• Newly invented weight control system
The mold is with Watanabe's special new press system. meats fit perfectly. This gives accurate weight control.

• Patented scissors cutting system
Watanabe's characteristic cutting system gives beautiful products.

• Safety control
With World 1st class interlock system, the best safety is promised.

• Hygiene
Wash down the machine. Easy to detach the parts without tools, even the special lif comes with for detaching the mold. Parts trolley comes with. Cleaning guidance is programed, everybody can clean easily.

• An all-purpose slicer used to slice ham, sausage and vegetables.

• Engaging/disengaging the clutch switches b/w automatic and manual slicing.

•A reliable all-purpose slicer, which is easy to handle, safe and sanitary.
The reasonable price achieved by thorough cost reduction with the original performance and features.

• Amazing safety feature: Inter-Lock system.
Simple design, Inter-Lock system brings perfect safety. It even has a special tool for blade exchange.

• Only takes a few minutes to disassemble for wash down.
Does not require any tools for disassembly or mounting.

• Thickness Control by 0.1mm.
The combination of a reliable Programmable controller and High class servomotor makes it possible to control the thickness by 0.1mm and for a steady meat feed.

• Variations with slant slice
Adjust the slice angle from 0 to 60 degrees as you want. The thickness range is between 0.1 to 30mm.
The maximum slicing speed is 250 pieces per minute. Slice continuously or with any interval is possible.

• Easy to set slice angle
Only turn the handle and input to the operation panel to set up the slice angle. Easy for everyone.

• Automatic drive, just input thickness and angle
All settings can be determined with the touch panel.
The computer finds the best measurement to insert by the slice angle.

• Watanabe, "Scissors cutting system
A rotating blade and a fixed blade hold the material and slice sharply like scissors.

• Less product loss
With a special product stopper, now it is possible to have the minimum end piece left.

• Approved by patent, "Scissors cutting style
A rotating blade and a fixed blade hold material, and Alice sharply like scissors.

• Simple control
The thickness, intermittent and shingling are all controlled by the touch screen. Also, 0.1mm thickness control is possible. The maximum slice speed is 260/min.

• Safety
It is easy to use with our simple design. The interlock system promises your safety. It is safe and easy to remove/re-assemble the blade with a special cover.

• Sanitary engineering
Only 1 minute to remove parts for cleaning. Easy cleaning by water resistance design and stainless steel body.

• Less product loss
With a special product stopper, now it is possible to have the minimum end piece left.

• Make your hard products softer and softer.
Tenderizing for pork cutlet, steak, fried chicken.

•Capacity increased by the continuous flat conveyor. (pork loin: 7,200 pieces/h)
High safety by the Inter Lock system.

• Tenderizing by a star-shape blade.
The gap between the blade set is adjustable by a smooth handle.

•Hygiene concerned by easy attachment of a blade set.
Easy maintenance and daily care friendly.