Construction | • Stainless steel feed pan and polished stainless steel case, cast iron hot tin-dipped bowl assembly, size 32 |
---|---|
Drive System | • Pre-lubricated chain drive |
Standard Features | • 11” (280 mm) aluminum legs, stomper, ring wrench, welded bowl guard on feed pan, operating and safety manual |
Construction | • Stainless steel feed pan and polished stainless steel case, cast iron hot tin dipped bowl, ring and auger, size 32 |
---|---|
Switch and Interlock | • Magnetic contactor with waterproof push buttons mounted on right side of machine (factory installed) when facing bowl and feed pan interlock. Push buttons can be optionally mounted on left side of the stainless steel case |
Standard Features | • 4” aluminum legs, splash guard, stomper, stainless steel welded bowl guard on feed pan, operating and safety manual |
Construction | • Cast aluminum base |
---|---|
Drive System | • HTD (high-torque drive) steel wire power grip belt, 95% efficiency rated, non corrosive, no lubrication required |
Standard Features | • Stomper, operating and safety manual, • 6 foot cord and plug all single phases • 6 foot cordless plug all three phase |
Construction | • Case: mirror finish stainless steel |
---|---|
Drive System | • HTD (high-torque drive) steel wire power grip belt, 95% efficiency rated, non corrosive, no lubrication required |
Standard Features | • Stomper, operating and safety manual, 6 foot cord, and plug all single phase. 6 foot cordless plug all three phase |
Construction | • Case: mirror finish stainless steel |
---|---|
Drive System | • HTD (high-torque drive) steel wire power grip belt, 95% efficiency rated, non corrosive, no lubrication required |
Standard Features | • Stomper, operating and safety manual, 6 foot cord, and plug all single phase. 6 foot cordless plug all three phase |
Capacity and cutting technology | • Packing units / economy packs (optional) in accurate weight • High cutting performance: up to 2 t/h / 4,410 lbs per hour (depending on product and degree of filling) • Up to 50 cutting programs • High capacity also for smaller dices / strips enabled by the cutting force with up to 300 revolutions per minute of the blade |
---|---|
Economic efficiency | • Processing of various raw products • Highest possible product yield |
Cleaning and operator comfort | • Consistently ergonomic, even for cleaning • Easy access to all machine parts for cleaning • Gridset changes require no tools, thanks to the "Click&Go" grid set • User rights on four levels |
Capacity and cutting technology | • Packing units / economy packs (optional) in accurate weight • High cutting performance: up to 2 t/h / 4,410 lbs per hour (depending on product and degree of filling) • Up to 50 cutting programs • High capacity also for smaller dices / strips enabled by the cutting force with up to 300 revolutions per minute of the blade |
---|---|
Economic efficiency | • Processing of various raw products • Highest possible product yield |
Cleaning and operator comfort | • Consistently ergonomic, even for cleaning • Easy access to all machine parts for cleaning • Gridset changes require no tools, thanks to the "Click&Go" grid set • User rights on four levels |
Capacity and cutting technology | • Varied application options with regard to products and cutting processes (grating is also possible) • High output due to the extra-long cutting chamber (550 mm / 21 7/10”) • Multifunctional because continuous or intermittent cutting can be selected |
---|---|
Economic efficiency | • Optimum product compression due to automatic pre-pressing |
Cleaning and operator comfort | • Consistently ergonomic even for cleaning |
Product Specifications | • Stainless steel construction • H2 H-520 Casing Size Range: 1 mm – 60mm • H2 H-540 Casing Size Range: 40mm – 80mm • Automatically gathers casings • Hand activated trip lever • Air needs: 6 Bar (100 psi), 4.9 liters per cycle • Optional manual blade with stainless steel support • Optional automatic knife • Optional automatic loop device |
---|
Product Specifications | • Stainless steel construction • Clips bags and netting • Max bag size: 60mm • Air needs: 6 Bar (100 psi), 1 liter per cycle • Hand activated trip lever • Optional manual blade with stainless steel support |
---|
Product Specifications | • Stainless steel construction • H3 H-18 Casing Size Range: 40mm – 120mm • H3 H-540 Casing Size Range: 40mm – 80mm • Automatically gathers casings • Hand activated trip lever • Air needs: 6 Bar (100 psi), 7 liters per cycle • Optional manual blade with stainless steel support • Optional automatic knife • Optional automatic loop device |
---|
Product Specifications | • Stainless steel construction • Clips natural or artificial casings, bags, and netting • Casing size range: 1mm – 60mm • Automatically gathers casings & automatically cuts between • Hand activated trip lever • Air needs: 6 Bar (100 psi), 5.7 liters per cycle • Optional automatic loop device |
---|
Product Specifications | • Stainless steel construction • Magazine capacity: 300 clips • Casing size range: 1mm – 60mm • Optional manual blade with stainless steel support |
---|
Model | • 548SS, 552SS, 7548SS, 7552SS, 1056SS, 1556SS Grinders (Chopper/Mincer) |
---|---|
Construction | • Stainless steel feed pan and polished stainless steel case, Cast iron hot tin dipped bowl, ring, and auger |
Drive System | • Silent (10-15 HP) or Roller link (5, 7.5 HP) chain drive over wide face sprockets insuring maximum power transfer from motor to auger |
Standard Features | • Aluminum legs on 5 & 7.5 HP, Plated Steel legs on 10 & 15 HP, spurt guard, stomper, ring wrench, bowl guard on feed pan, operating and safety manual |
Product Specifications | • Stainless steel construction • Clips plastics, natural, fibrous, or collagen casings with or without loops • Casing size range: 30mm – 60mm • Clip closure: fully automatic / stuffer controlled • Air needs: 6 bar (100 psi), 7.2 liters per cycle • Electric needs: 110v or 220v, 60Hz, 150 Watt • Includes: stuffing tube, brake, stuffer cable, and stuffer connecting tube • Optional automatic loop device • Optional string feed for ring sausage • Optional casing loading device • Clips on spool available • Up to 60 portions per minute (stuffer size dependent) |
---|
Product Specifications | • Stainless steel construction • Clips plastic, fibrous, or collagen casings with or without loops • K4-90 Casing size range: 40mm – 110mm • K4-120 Casing size range: 70mm – 130mm • Clip closure: fully automatic / stuffer controlled • Air needs: 6 bar (100 psi), 17.5 liters per cycle • Electric needs: 110v or 220v, 60Hz, 150 Watt • Strands two or more pieces without cutting • Optional automatic loop device • Clips on spool available • K4-90 Output: Up to 45 portions per minute (stuffer size dependent) • K4-120 Output: Up to 25 portions per minute (stuffer size dependent) |
---|
Your benefits at a glance | • Ideal cutting conditions, consistent cutting quality due to the best possible interaction between TREIF quality blades and TREIF machine • Best possible use of your cutting machine‘s potential and consequently higher yield • High degree of process reliability • Long cutting-edge life and long service life of the blade through use of high-quality blade steel, lowest possible tolerance limits in manufacturing and professional, low-wear sharpening and regrinding • No risk of damage or additional wear on other machine parts (e.g. bearing, cutting frame) through non-expert blade treatment • Sharpening devices for TREIF blades (HS models) |
---|
Product Specifications | • #22 Head • 110V, 1Ph, ¾ HP, 60 Hz • Stainless Steel Construction • Yield: 6 to 7 lbs / min • Table Top Model |
---|---|
Product Details | Making your meat production more efficient means using top-quality equipment. Mainca USA, Inc. supplies an excellent line of meat mincers and grinders throughout the USA and Canada. |
Product Specifications | • #32 Head • Available in 220V 1Ph or 220V 3Ph • 3 HP, 60 Hz • Stainless Steel Construction • Yield: 30 lbs / min • Extra Large Feed Tray Available • Refrigerated Version Available • Table Top Model |
---|---|
Product Details | Making your meat production more efficient means using top-quality equipment. Mainca USA, Inc. supplies an excellent line of meat mincers and grinders throughout the USA and Canada. |
Product Specifications | • #32 Head • 220V, 3Ph, 5 HP, 60 Hz • Stainless Steel Construction • Yield: 30 lbs / min • Extra Large Feed Tray Available • Floor Model |
---|---|
Product Details | Making your meat production more efficient means using top-quality equipment. Mainca USA, Inc. supplies an excellent line of meat mincers and grinders throughout the USA and Canada. |
Product Specifications | • #12 Head • 110V, ¾ HP, 60 Hz • Stainless Steel Construction • Yield: 6 to 7 lbs / min • Table Top Model |
---|---|
Product Details | Making your meat production more efficient means using top-quality equipment. Mainca USA, Inc. supplies an excellent line of meat mincers and grinders throughout the USA and Canada. |
Product Specifications | • #32 Head • Available in 220V 1Ph or 220V 3Ph • 1.75 HP, 60 Hz • Stainless Steel Construction • Yield: 16 to 17 lbs / min • Extra Large Feed Tray Available • Table Top Model |
---|---|
Product Details | Making your meat production more efficient means using top-quality equipment. Mainca USA, Inc. supplies an excellent line of meat mincers and grinders throughout the USA and Canada. |
Product Specifications | • Stainless steel construction • Clips plastics, fibrous, or collagen casings with or without loops • Casing size range: 40mm – 110mm • Clip closure: hand lever semi-automatic operation • Air needs: 6 bar (100 psi), 7.8 liters per cycle • Electric needs: 110v or 220v, 60Hz, 100 Watt • Includes: stuffing tube, brake, stuffer cable, & stuffer connecting tube • Optional automatic loop device • Optional string feed for ring sausage • Clips on spool available |
---|
Capacity and cutting technology | • Basic model from the TWISTER family • Cutting capacity: up to 2,000 kg/h / 4,409 lbs • High output rate for cutting due to long cutting chamber (550 mm / 21 7/10") • Flexibility and strong performance thanks to choice between continuous and intermittent cutting • Best cutting quality through AVS and DHS |
---|---|
Economic efficiency | • Particularly cost-effective solution for perfect cutting quality in the mid-range performance class • Ergonomic, one-hand operating system for the closing of the product loading chamber • Optimum product compression due to automatic pre-pressing (AVS) |
Cleaning and operator comfort | • Consistently ergonomic, even for cleaning • Easy access to all machine parts for cleaning • Gridset changes require no tools, thanks to the "Click&Go" grid set • A hygiene cylinder keeps the cutting chamber clean (optional) |
Search
Product Type
- Bag Loaders (4)
- Baggers (3)
- Bowl Choppers (4)
- Breading Equipment (4)
- Carts & Tubs (5)
- Char Broilers (1)
- Chippers (1)
- Cleaners (3)
- Clippers (9)
- Corer & Peeler (1)
- Cutter (2)
- Dicers (5)
- Formers & Molders (8)
- Fryers (2)
- Griddles (3)
- Heating & Holding Cabinets (1)
- Hot Air Tunnels (5)
- Hot Plates (2)
- Hot Water Circulators & Dip Tanks (2)
- Injectors (5)
- L-Bar sealers (7)
- Lifts (5)
- Meat Grinders (11)
- Mixer Grinders (9)
- Mixers (19)
- Oven Proofer Combos (6)
- Ovens (8)
- Overwrappers (10)
- Portion Cutters (3)
- Proofers (5)
- Refrigeration & Freezing (15)
- Rotisseries (3)
- Saws (13)
- Sealers (5)
- Shredder (1)
- Skewers (2)
- Slicers (36)
- Smokers (15)
- Stock Pot Range (1)
- Stuffers (13)
- Table Carts (6)
- Tables (10)
- Tenderizers (5)
- Vacuum Sealers (22)
- Vacuum Stuffers (4)
- Vacuum Tumblers (7)
- Washer (12)
Brands
Products
- Food Equipment (289)
- Parts & Supplies (29)
- Specials (2)