Standard Features | • Gear driven, high torque transmission • Three fixed speeds • Powerful, custom built motor • Front-mounted controls with 60-minute digital timer and last batch recall • Heat-treated hardened steel alloy gears and shafts • Permanently lubricated transmission • Interlocking stainless steel bowl guard with built-in ingredient chute, easy to attach and remove for easy cleaning • Safety interlocked bowl lift • Industry standard #12 attachment hub • Thermal overload protection • Rigid cast iron body • NSF approved enamel gray paint • 6-foot cord and ground plug • Non-slip rubber feet • ETL and NSF listed • Two years parts and labor warranty |
---|
Standard Features | • Spiral Mixer is all metal construction with FDA approved white powder coat. • Unit has 2 fixed speeds, manual and automatic controls with dual 20-minute electronic timer for automatic shifting from 1st to 2nd speed. • Mixer has dual motors, ¾ HP bowl/35 RPMs, a dough hook is two speed • Motors are high torque, ball bearing, totally enclosed and fan cooled. • Mixer comes standard with steel wire form interlocked bowl guard, stainless steel bowl and spiral dough hook. • Unit includes ball bearing mounted front and back casters for mobility. • Two-year parts and labor warranty |
---|
Standard Features | • High torque, fixed speed direct gear drive transmission • Oil bath transmission • Heat-treated hardened steel alloy gears and shafts • Powerful custom-built motor • Front mounted controls with electronic timer • Thermal overload protection • Rigid cast iron body • Stainless steel bowl guard with built in ingredient chute • NSF approved enamel gray paint • Safety interlocked bowl guard and bowl lift • Industry standard #12 attachment hub • Non-slip rubber feet • 6-foot cord, no plug • ETL and NSF listed • Two years parts and labor warranty |
---|
Standard Features | • Heavy duty motor, 800 watts • Ten speeds • Electronic speed and load control • Durable, NSF Approved, white powder coating • Rigid cast aluminum body • Standard attachments include stainless steel bowl, wire whip, dough hook and flat beater • Polycarbonate splash cover with ingredient chute • All stainless steel attachments • Dual bowl clamps to lock bowl down • Permanently lubricated transmission • Thermal overload protection • Attachment hub • Easy action bowl lift • Six foot cord with plug • Two years parts and labor warranty |
---|
Standard Features | • High torque, fixed speed direct gear drive transmission • Oil bath transmission • Heat-treated hardened steel alloy gears and shafts • Powerful custom-built motor • Front mounted controls with electronic timer • Thermal overload protection • Power bowl lift • Rigid cast iron body • Stainless steel bowl guard with built in ingredient chute • NSF approved enamel gray paint • Safety interlocked bowl guard and bowl lift • Industry standard #12 attachment hub • Non-slip rubber feet • 6-foot cord, no plug • ETL and NSF listed • Two years parts and labor warranty |
---|
Standard Features | • 1/4 HP, 115/60/1, 5 amp custom built motor • Gear driven, high torque transmission • Three fixed speeds • Heat-treated hardened steel alloy gears and shafts • Permanently lubricated transmission • Thermal overload protection • Rigid cast aluminum body • Standard attachments include aluminum dough hook, flat beater and • stainless-steel wire whip • Polycarbonate bowl guard • Safety interlocked bowl lift • Front mounted controls • 15 minute digital timer • 6 foot cord and plug • Shipping weight 62 lbs. • Overall dimensions 11.8"W x 15.8"D x 22.9"H • ETL and NSF listed, CSA approved • Two years parts and labor warranty |
---|
Construction | • Heavy duty stainless steel hopper, lid, paddle, frame and legs. Hot-tin-dipped cast iron bowl, ring, and auger, size 32 |
---|---|
Switch | • Watertight magnetic with thermal overload and under voltage protection |
Standard Features | • Stainless steel 2nd grind paddle with hook, no inlet (solid tub) hopper, spurt guard, ring wrench, receptacle for pneumatic footswitch, operating and safety manual |
Construction | • Heavy duty stainless steel hopper, lid, paddle, frame, and legs. Cast iron hot tin dipped bowl, ring, and auger (uses size 32 knife/plate. |
---|---|
Switch | • Watertight magnetic with thermal overload and under voltage protection |
Standard Features | • Stainless steel 2nd grind paddle with center arms, 5” dia. Total lock swivel casters with anti-microbial wheels, spurt guard, extra rod for front, left or right side opening lid, power cord (see above), ring wrench, bowl nut wrench, two shear pins with screws, receptacle for electric footswitch ,operating and safety manual. |
Construction | • Heavy duty stainless steel hopper, lid, paddle, frame and legs. • Cast iron hot tin dipped Size 52 bowl, ring and auger. |
---|---|
Switch | • Watertight Magnetic with thermal overload and under voltage protection. |
Standard Features | • Stainless steel 2nd grind paddle with center arms, 5” dia. Total lock swivel casters with anti-microbial wheels, spurt guard, extra rod for front, left or right side opening lid, power cord (see above), ring wrench, bowl nut wrench, two shear pins with screws, receptacle for electric footswitch, operating and safety manual. |
Construction | • Heavy duty stainless steel hopper, lid, paddles, frame and legs. Stainless steel, size 56 bowl, ring and auger |
---|---|
Switch | • Watertight magnetic controller with thermal overload and under voltage protection, separate mix and grind controls |
Standard Features | • Four 11” (28 cm) stainless steel adjustable legs with foot pads. Note: if machine is raised to 8” or more of exposed leg threads, the machine must have a reinforcing cross leg brace (#40458ne). Spurt guard, lid closing assist dampeners, operating and safety manual |
Construction | • Heavy duty stainless steel hopper, lid, paddles, frame and legs, stainless steel size 56 bowl, ring and auger |
---|---|
Switch | • 3 phase, watertight magnetic with thermal overload and under voltage protection. 1 phase, Variable Frequency Drives (VFD) with overload protection. 50/60 Hz Frequency |
Standard Features | • Hopper without side feed inlet, preset pneumatic (45 p.S.I.) lid opener on the right side (when facing bowl), stainless steel spurt guard, ring wrench, operating and safety manual, 11” (280 mm) stainless steel adjustable threaded legs mounted on floor pads. Note – if the machine is raised to 8” (203 mm) or more of exposed threads, the machine must have reinforcing cross leg brace (#60142ne) |
Construction | • Heavy duty stainless steel hopper, lid, paddles, frame and legs. Stainless steel, size 56 bowl, ring and auger |
---|---|
Switch | • Watertight magnetic controller with thermal overload and under voltage protection, separate mix and grind controls |
Standard Features | • Four 11” (28 cm) stainless steel adjustable legs with foot pads. Note: if machine is raised to 8” or more of exposed leg threads, the machine must have a reinforcing cross leg brace (#40458ne). Spurt guard, lid closing assist dampeners, operating and safety manual |
Model Number | • No. 30000-50 |
---|---|
Standard Features | • #56 or #66 Bowl with a 20 HP Motor • All Stainless Steel Construction including bowl, ring and auger • Air Operated Lid |
Model Number | • QUAD No. 81000-100, DMX 30000-100 |
---|---|
Standard Features | • Capacity 100 lbs. (45 1/3 Kg.) • 1 hp motor QUAD • 3/4 hp motor DMX • Available in QUAD or DMX models • LED timer • Made in USA |
Model Number | • QUAD No. 81000-HD, DMX No. 31000-100 |
---|---|
Standard Features | • Capacity 100 lbs. (45 1/3 Kg.) • 1-1/2 hp motor • Available in QUAD or DMX models • LED timer • Heavy Duty Series • Made in USA |
Model Number | • QUAD No. 82000-200, DMX No. 30000-200 |
---|---|
Standard Features | • Capacity 200 lbs. (90.72 Kg.) • 1-1/2 hp motor • Available in DMX and QUAD models • Made in the USA • LED timer |
Model Number | • QUAD No. 82000-HD, DMX No. 31000-200 |
---|---|
Standard Features | • Capacity 200 lbs. (90.72 Kg.) • 3 hp motor • Available in DMX and QUAD models • Heavy Duty Series • Made in the USA • LED timer |
Model Number | • QUAD No. 83000-300, DMX No. 30000-300 |
---|---|
Standard Features | • Capacity 300 lbs. (136 Kg.) • 3 hp motor • Available in DMX and QUAD models • Made in the USA • LED timer |
Model Number | • QUAD No. 83000-300 HD, DMX No. 31000-300 |
---|---|
Standard Features | • Capacity 300 lbs. (136 Kg.) • 5 hp motor • Available in DMX and QUAD models • Heavy duty series • Made in USA • LED timer |
Model Number | • QUAD No. 85000-500, DMX No. 30000-500 |
---|---|
Standard Features | • Capacity 500 lb. • 5 hp motor • Available in DMX and QUAD models • Made in USA • LED timer |
Model Number | • QUAD No. 85000-500 HD, DMX No. 30000-500 HD |
---|---|
Standard Features | • Capacity 500 lb. • 7-1/2 hp motor • Available in DMX and QUAD models • Made in USA • LED timer • Heavy duty series |
Construction | • Heavy duty stainless steel hopper, lid, paddle, frame and auger |
---|---|
Switch | • Watertight magnetic with thermal overload and under voltage protection, 24 volt control circuit |
Standard Features | • SS auger (bowl & ring are plated), no inlet(solid tub) hopper, spurt guard, ring wrench, pneumatic footswitch, 11’ cord and plug (U.S.), reversible paddles, meat cart less lugs, locking swivel casters with Prevenz Antimicrobial additive, bowl nut wrench, operating and safety manual. |
Standard Features | • Thermostatically Controlled Hot Plate with Non-Stick Replaceable Cover • Standard 115V Power Supply • Solid State Controlled Film Cut Off Rod • Splash Shield, Lower Shelf • Heavy Gauge Welded Aluminum Frame • Aluminum and Stainless Steel Construction • Stainless Steel Wrapping Surface • Adjustable Foot Pads for Easy Leveling on Uneven Floors • Stretch Film – 18” Maximum Width • Adjustable Film Tension |
---|---|
Machine Specs & Options | • Overall Dimensions: 26” D, 23” W, 38” H (66 D, 58 W, 97 H cm) • Working Height: 36” (91cm) • Power Requirement: 115 Volt, 6.5 Amp, 60 Cycles • Wattage: 725 Watts • Weight: 102 – 51 lbs./24 kg; 107A – 55 lbs./24 kg |
Product Specifications | • #32 Head • 135 lb capacity • Available in 220V 1Ph or 220V 3Ph • Stainless steel construction including grinding bowl, worm, and end ring • 10 Program Mix Timer • Yield: 50 to 55 lbs / min • Options: • Unger 98 Double Cut Head Available • Foot Pedal Switch Available |
---|---|
Additional Features | • Mix without grinding with mix and dump capability • Ergonomic design • Automatic forward and reverse mixing • End ring wear washers • Splash guard for loading • Pour-through lid design • Open frame construction • Separate mix and grind motors |
Product Details | Making your meat production more efficient means using top-quality equipment. Mainca USA, Inc. supplies an excellent line of meat mincers and grinders throughout the USA and Canada. |
Search
Product Type
- Bag Loaders (4)
- Baggers (3)
- Bowl Choppers (4)
- Breading Equipment (4)
- Carts & Tubs (5)
- Char Broilers (1)
- Chippers (1)
- Cleaners (3)
- Clippers (9)
- Corer & Peeler (1)
- Cutter (2)
- Dicers (5)
- Formers & Molders (8)
- Fryers (2)
- Griddles (3)
- Heating & Holding Cabinets (1)
- Hot Air Tunnels (5)
- Hot Plates (2)
- Hot Water Circulators & Dip Tanks (2)
- Injectors (5)
- L-Bar sealers (7)
- Lifts (5)
- Meat Grinders (11)
- Mixer Grinders (9)
- Mixers (19)
- Oven Proofer Combos (6)
- Ovens (8)
- Overwrappers (10)
- Portion Cutters (3)
- Proofers (5)
- Refrigeration & Freezing (15)
- Rotisseries (3)
- Saws (13)
- Sealers (5)
- Shredder (1)
- Skewers (2)
- Slicers (36)
- Smokers (15)
- Stock Pot Range (1)
- Stuffers (13)
- Table Carts (6)
- Tables (10)
- Tenderizers (5)
- Vacuum Sealers (22)
- Vacuum Stuffers (4)
- Vacuum Tumblers (7)
- Washer (12)
Brands
Products
- Food Equipment (289)
- Parts & Supplies (29)
- Specials (2)