Food Equipment

346SS Manual Feed Grinder
Construction

• Stainless steel feed pan and polished stainless steel case, cast iron hot tin-dipped bowl assembly, size 32

Drive System

• Pre-lubricated chain drive

Standard Features

• 11” (280 mm) aluminum legs, stomper, ring wrench, welded bowl guard on feed pan, operating and safety manual

$100.00
6642 Meat Grinder
Construction

• Stainless steel feed pan and polished stainless steel case, cast iron hot tin dipped bowl, ring and auger, size 32

Switch and Interlock

• Magnetic contactor with waterproof push buttons mounted on right side of machine (factory installed) when facing bowl and feed pan interlock. Push buttons can be optionally mounted on left side of the stainless steel case

Standard Features

• 4” aluminum legs, splash guard, stomper, stainless steel welded bowl guard on feed pan, operating and safety manual

$100.00
722 Manual Feed Grinder
Construction

• Cast aluminum base

Drive System

• HTD (high-torque drive) steel wire power grip belt, 95% efficiency rated, non corrosive, no lubrication required

Standard Features

• Stomper, operating and safety manual,

• 6 foot cord and plug all single phases

• 6 foot cordless plug all three phase

$100.00
822SS Manual Feed Grinder
Construction

• Case: mirror finish stainless steel

Drive System

• HTD (high-torque drive) steel wire power grip belt, 95% efficiency rated, non corrosive, no lubrication required

Standard Features

• Stomper, operating and safety manual, 6 foot cord, and plug all single phase. 6 foot cordless plug all three phase

$100.00
922SS Manual Feed Grinder
Construction

• Case: mirror finish stainless steel

Drive System

• HTD (high-torque drive) steel wire power grip belt, 95% efficiency rated, non corrosive, no lubrication required

Standard Features

• Stomper, operating and safety manual, 6 foot cord, and plug all single phase. 6 foot cordless plug all three phase

$100.00
AFMG-24 Mixer Grinder
Construction

• Heavy duty stainless steel hopper, lid, paddle, frame and legs. Hot-tin-dipped cast iron bowl, ring, and auger, size 32

Switch

• Watertight magnetic with thermal overload and under voltage protection

Standard Features

• Stainless steel 2nd grind paddle with hook, no inlet (solid tub) hopper, spurt guard, ring wrench, receptacle for pneumatic footswitch, operating and safety manual

$100.00
AFMG-48II Mixer Grinder
Construction

• Heavy duty stainless steel hopper, lid, paddle, frame, and legs. Cast iron hot tin dipped bowl, ring, and auger (uses size 32 knife/plate.

Switch

• Watertight magnetic with thermal overload and under voltage protection

Standard Features

• Stainless steel 2nd grind paddle with center arms, 5” dia. Total lock swivel casters with anti-microbial wheels, spurt guard, extra rod for front, left or right side opening lid, power cord (see above), ring wrench, bowl nut wrench, two shear pins with screws, receptacle for electric footswitch ,operating and safety manual.

$100.00
AFMG-52 Mixer Grinder
Construction

• Heavy duty stainless steel hopper, lid, paddle, frame and legs.

• Cast iron hot tin dipped Size 52 bowl, ring and auger.

Switch

• Watertight Magnetic with thermal overload and under voltage protection.

Standard Features

• Stainless steel 2nd grind paddle with center arms, 5” dia. Total lock swivel casters with anti-microbial wheels, spurt guard, extra rod for front, left or right side opening lid, power cord (see above), ring wrench, bowl nut wrench, two shear pins with screws, receptacle for electric footswitch, operating and safety manual.

$100.00
AFMG-52-4 Auto Feed Mixer Grinder
Construction

• Heavy duty stainless steel hopper, lid, paddles, frame and legs. Stainless steel, size 56 bowl, ring and auger

Switch

• Watertight magnetic controller with thermal overload and under voltage protection, separate mix and grind controls

Standard Features

• Four 11” (28 cm) stainless steel adjustable legs with foot pads. Note: if machine is raised to 8” or more of exposed leg threads, the machine must have a reinforcing cross leg brace (#40458ne). Spurt guard, lid closing assist dampeners, operating and safety manual

$100.00
AFMG-56 MK III Mixer Grinder
Construction

• Heavy duty stainless steel hopper, lid, paddles, frame and legs, stainless steel size 56 bowl, ring and auger

Switch

• 3 phase, watertight magnetic with thermal overload and under voltage protection. 1 phase, Variable Frequency Drives (VFD) with overload protection. 50/60 Hz Frequency

Standard Features

• Hopper without side feed inlet, preset pneumatic (45 p.S.I.) lid opener on the right side (when facing bowl), stainless steel spurt guard, ring wrench, operating and safety manual, 11” (280 mm) stainless steel adjustable threaded legs mounted on floor pads. Note – if the machine is raised to 8” (203 mm) or more of exposed threads, the machine must have reinforcing cross leg brace (#60142ne)

$100.00
AFMG-56-4 Auto Feed Mixer Grinder
Construction

• Heavy duty stainless steel hopper, lid, paddles, frame and legs. Stainless steel, size 56 bowl, ring and auger

Switch

• Watertight magnetic controller with thermal overload and under voltage protection, separate mix and grind controls

Standard Features

• Four 11” (28 cm) stainless steel adjustable legs with foot pads. Note: if machine is raised to 8” or more of exposed leg threads, the machine must have a reinforcing cross leg brace (#40458ne). Spurt guard, lid closing assist dampeners, operating and safety manual

$100.00
EMG-32 Ergonomic Mixer Grinder
Construction

• Heavy duty stainless steel hopper, lid, paddle, frame and auger

Switch

• Watertight magnetic with thermal overload and under voltage protection, 24 volt control circuit

Standard Features

• SS auger (bowl & ring are plated), no inlet(solid tub) hopper, spurt guard, ring wrench, pneumatic footswitch, 11’ cord and plug (U.S.), reversible paddles, meat cart less lugs, locking swivel casters with Prevenz Antimicrobial additive, bowl nut wrench, operating and safety manual.

$100.00
HHP (Heavy Horse Power) Meat Grinders
Model

• 548SS, 552SS, 7548SS, 7552SS, 1056SS, 1556SS Grinders (Chopper/Mincer)

Construction

• Stainless steel feed pan and polished stainless steel case, Cast iron hot tin dipped bowl, ring, and auger

Drive System

• Silent (10-15 HP) or Roller link (5, 7.5 HP) chain drive over wide face sprockets insuring maximum power transfer from motor to auger

Standard Features

• Aluminum legs on 5 & 7.5 HP, Plated Steel legs on 10 & 15 HP, spurt guard, stomper, ring wrench, bowl guard on feed pan, operating and safety manual

$100.00
MG-95 Mixer Grinder
Product Specifications

• #32 Head

• 135 lb capacity

• Available in 220V 1Ph or 220V 3Ph

• Stainless steel construction including grinding bowl, worm, and end ring

• 10 Program Mix Timer

• Yield: 50 to 55 lbs / min

• Options:
• Variable speed
• Castors
• Unger 98 Double Cut Head
• Foot Pedal Switch
• Castors Available

• Unger 98 Double Cut Head Available

• Foot Pedal Switch Available

Additional Features

• Mix without grinding with mix and dump capability

• Ergonomic design

• Automatic forward and reverse mixing

• End ring wear washers

• Splash guard for loading

• Pour-through lid design

• Open frame construction

• Separate mix and grind motors

Product Details

Making your meat production more efficient means using top-quality equipment. Mainca USA, Inc. supplies an excellent line of meat mincers and grinders throughout the USA and Canada.

$100.00
MINI-32 Mini Mixer Grinder
Construction

• Stainless steel: Frame, Enclosure, Hopper, Lid, Bowl, Ring, Auger

Switch

• 3 phase, watertight magnetic with thermal overload and under voltage protection. 1 phase, Variable Frequency Drives (VFD) with overload protection. 50/60 Hz Frequency

Standard Features

• No inlet (solid hopper), SS bowl assembly, removable for easier cleaning, spurt guard, ring wrench, operating and safety manual, grinder stand with locking swivel casters, receptacle for pneumatic footswitch

$100.00
PC-82 Grinder
Product Specifications

• #22 Head

• 110V, 1Ph, ¾ HP, 60 Hz

• Stainless Steel Construction

• Yield: 6 to 7 lbs / min

• Table Top Model

Product Details

Making your meat production more efficient means using top-quality equipment. Mainca USA, Inc. supplies an excellent line of meat mincers and grinders throughout the USA and Canada.

$100.00
PC-98 Grinder
Product Specifications

• #32 Head

• Available in 220V 1Ph or 220V 3Ph

• 3 HP, 60 Hz

• Stainless Steel Construction

• Yield: 30 lbs / min

• Extra Large Feed Tray Available

• Refrigerated Version Available

• Table Top Model

Product Details

Making your meat production more efficient means using top-quality equipment. Mainca USA, Inc. supplies an excellent line of meat mincers and grinders throughout the USA and Canada.

$100.00
PC-98L Grinder
Product Specifications

• #32 Head

• 220V, 3Ph, 5 HP, 60 Hz

• Stainless Steel Construction

• Yield: 30 lbs / min

• Extra Large Feed Tray Available

• Floor Model

Product Details

Making your meat production more efficient means using top-quality equipment. Mainca USA, Inc. supplies an excellent line of meat mincers and grinders throughout the USA and Canada.

$100.00
PM-70 Grinder
Product Specifications

• #12 Head

• 110V, ¾ HP, 60 Hz

• Stainless Steel Construction

• Yield: 6 to 7 lbs / min

• Table Top Model

Product Details

Making your meat production more efficient means using top-quality equipment. Mainca USA, Inc. supplies an excellent line of meat mincers and grinders throughout the USA and Canada.

$100.00
PX-32 Grinder
Product Specifications

• #32 Head

• Available in 220V 1Ph or 220V 3Ph

• 1.75 HP, 60 Hz

• Stainless Steel Construction

• Yield: 16 to 17 lbs / min

• Extra Large Feed Tray Available

• Table Top Model

Product Details

Making your meat production more efficient means using top-quality equipment. Mainca USA, Inc. supplies an excellent line of meat mincers and grinders throughout the USA and Canada.

$100.00