No products in the cart.
| Product Details | • Designed and built for commercial use, the NCO-2H Natural Convection Oven will provide a quick return on your investment. So versatile you can bake cookies or muffins in the morning and pizza or sub-rolls at noon. Simple to operate, even your least experienced employee will be an expert quickly. All of this and the quality you have come to expect from Piper’s Super Systems oven lineup |
|---|---|
| Standard Features | • Natural convection & radiant heat design does not dry out product • Stainless steel construction easily cleaned and maintained • Fully insulated with 2” insulation • Chrome plated wire rack • No moving parts in oven reduces maintenance problems and increases reliability • 60 Minute reminder timer • 120v electrical hook-up plugs into standard 15-amp circuit • Full-view, heat-reflective tempered glass door allows for energy-efficient sight baking • Spring loaded hinges for better door control • Maximum Oven Temp 400° |
| Construction | • The oven corner posts shall be 18 gauge stainless steel with a 20 gauge stainless steel wrapper for top, sides and back panels. The interior oven cavity shall be constructed of heat retentive 18 gauge aluminized steel with chrome plated wire racks or .190 aluminum decks • The oven shall work with a patented "Heat Sink" principle and "Natural Convection" technology. When the materials in oven are heated to the proper temperature the oven shall bake with radiant heat and conduction. The oven shall also have heat release vent that draws air through the oven cavity and over decks • The oven shall have no moving parts. Each deck shall be individually, thermostatically controlled. The oven shall have a heat reflective glass door |
$100.00
| Standard Features | • Only Piper's equipment has the advantage of FoodSafe technology and certification. This ensures that your food is kept "out of the DANGER-ZONE." Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F "DANGER-ZONE." Since there is no simple way of knowing when the degree of contamination has risen to a level which could result in illness or death, chilling or freezing food rapidly is the only FoodSafe answer. FDA and HACCP Regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish. Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens. Nothing does it better than FoodSafe |
|---|---|
| Internal Fitting | • Shelves slot-in supports made of stainless steel, extractable without using any tools for easy internal cleaning. Interstep between the slides 3.15" |
| Cooling Unit | • Hermetically sealed compressor • Evaporator fitted with high flow rate fan for maximum cooling efficiency • Ecological refrigerant R404A. • Manual defrosting device and evaporation system of water condensation without electrical energy |
$100.00
| General Features | • Outside stainless steel Scotch-Brite finish • Inside stainless steel with rounded corners • Inside bottom and floor die-formed leakproof • Insulation in high-density (93 lbs approx.) expanded polyurethane CFC and HCFC-free, thickness 3.15" • Copper evaporator coil with aluminum fins protected against corrosion with an electronically applied epoxy paint 20 microns thick • Anti-condensation heating element fitted on the door under the gasket • Horizontal ergonomic handle with inside security lock • Door with rubber sweeper gasket with closing hinges • Heated core probe in blast freezer for an easy extraction • Door with lock • Electro-Fin (coating to protect fins from corosion) |
|---|---|
| Internal Fitting | • Internal bumpers in stainless steel to prevent damage by trolleys • External guards in stainless steel to prevent damage to control panel |
| Cooling Unit | • Remote condensing unit and possibility to have stainless steel protective cover • Evaporator fitted with high flow rate fan for maximum cooling efficiency • Ecological refrigerant R404A |
$100.00
| Product Details | • The RIP-2, our double proofing cabinet, offers total versatility no matter what your proofing needs. Use any combination of roll-in or reach-in racks to accommodate varied bakery production. However it’s used, count on Super Systems’ dependable controls and automatic humidity for easy, worry-free proofing |
|---|---|
| Standard Features | • Can accommodate two roll-in bread rack or has 32 wire shelves adjustable on 3 inch centers to hold 18" x 26" sheet pans • Individual heat and humidity controls provides precise control over proofing environment • Individual heat controls go from 0° to 125° (optional 225°) • High volume blowers Circulates heat and humidity efficiently • Standard automatic humidity Eliminates manualfill water pan • Full-view glass door provides sight-proofing • Heavy-duty cabinet construction and stainless steel finish – interior and exterior – provides long life and easy maintenance |
| Construction | • The proofer’s interior and exterior shall be constructed of 20 gauge stainless steel. Corner posts constructed of 18 gauge stainless steel. The proofer shall have two thermostatically controlled 750 watt elements for creating heat and an infinitely controlled humidistat 1250 watt burner element for creating moisture. Proofer shall be brightly lit providing sight merchandising • Proofer shall have two individual circuit breakers. One for the proofer thermostat and heat element. One for the humidity infinite switch and burner element and the proofer lights |
$100.00
| General Features | • Outside stainless steel Scotch-Brite finish • Inside stainless steel with rounded corners • Inside bottom and floor die-formed leakproof • Insulation in high-density (93 lbs approx.) expanded polyurethane CFC and HCFC-free, thickness 3.15" • Copper evaporator coil with aluminum fins protected against corrosion with an electronically applied epoxy paint 20 microns thick • Anti-condensation heating element fitted on the door under the gasket • Horizontal ergonomic handle with inside security lock • Nr. 2 Doors with rubber sweeper gasket with closing hinges • Heated core probe in blast freezer for an easy extraction • Door with lock • Electro-Fin (coating to protect fins from corosion) |
|---|---|
| Internal Fitting | • Internal bumpers in stainless steel to prevent damage by trolleys • External guards in stainless steel to prevent damage to control panel |
| Cooling Unit | • Remote condensing unit and possibility to have stainless steel protective cover • Evaporator fitted with high flow rate fan for maximum cooling efficiency • Ecological refrigerant R404A |
$100.00
| General Features | • Outside stainless steel Scotch-Brite finish • Inside stainless steel with rounded corners • Inside bottom and floor die-formed leakproof • Insulation in high-density (93 lbs approx.) expanded polyurethane CFC and HCFC-free, thickness 3.15" • Copper evaporator coil with aluminum fins protected against corrosion with an electronically applied epoxy paint 20 microns thick • Anti-condensation heating element fitted on the door under the gasket • Horizontal ergonomic handle with inside security lock • Nr. 2 Doors with rubber sweeper gasket with closing hinges • Heated core probe in blast freezer for an easy extraction • Door with lock • Electro-Fin (coating to protect fins from corosion) |
|---|---|
| Internal Fitting | • Internal bumpers in stainless steel to prevent damage by trolleys • External guards in stainless steel to prevent damage to control panel. |
| Cooling Unit | •Remote condensing unit and possibility to have stainless steel protective cover • Evaporator fitted with high flow rate fan for maximum cooling efficiency • Ecological refrigerant R404A |
$100.00
| General Features | • Outside stainless steel Scotch-Brite finish • Inside stainless steel with rounded corners • Inside bottom and floor die-formed leakproof • Insulation in high-density (93 lbs approx.) expanded polyurethane CFC and HCFC-free, thickness 3.15" • Copper evaporator coil with aluminum fins protected against corrosion with an electronically applied epoxy paint 20 microns thick • Anti-condensation heating element fitted on the door under the gasket • Horizontal ergonomic handle with inside security lock • Nr. 2 Doors with rubber sweeper gasket with closing hinges • Heated core probe in blast freezer for an easy extraction • Door with lock |
|---|---|
| Internal Fitting | • Internal bumpers in stainless steel to prevent damage by trolleys • External guards in stainless steel to prevent damage to control panel |
| Cooling Unit | • Remote condensing unit and the possibility to have stainless steel protective cover •Evaporator fitted with high flow rate fan for maximum cooling efficiency • Ecological refrigerant R404A |
$100.00
| Project Features | • Only Piper's equipment has the advantage of FoodSafe technology and certification. This ensures that your food is kept "out of the DANGER-ZONE." Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F "DANGER-ZONE." Since there is no simple way of knowing when the degree of contamination has risen to a level which could result in illness or death, chilling or freezing food rapidly is the only FoodSafe answer. FDA and HACCP Regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish. Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens. Nothing does it better than FoodSafe |
|---|---|
| Electrical Control Board | • Electronic control board equipped with display, which shows the status of the appliance in every moment. • The microprocessor is able to memorize till 100 programs. • The "T" electronic control can memorize eventual alarms, and can control up to 4 core probes or 4 sensors Defrosting with activation of an electric heating element fitted on the evaporator • Compressor protected by overload cut-out with automatic reset Microswitch cuts out the evaporator fan and compressor when the door is opened. |
| Internal Fitting | • Stainless steel 18/10 glide supports joint fixed in the sides of the cooling compartment. • Distance between the slides couples is 2.56" • Manual defrosting device and evaporation system of water condensation without electrical energy |
$100.00
| Project Features | • Only Piper's equipment has the advantage of FoodSafe technology and certification. This ensures that your food is kept "out of the DANGER-ZONE." Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F "DANGER-ZONE." Since there is no simple way of knowing when the degree of contamination has risen to a level which could result in illness or death, chilling or freezing food rapidly is the only FoodSafe answer. FDA and HACCP Regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish. Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens. Nothing does it better than FoodSafe |
|---|---|
| Internal Fitting | • Stainless steel 18/10 glide supports joint fixed in the sides of the cooling compartment • Distance between the slides couples is 2.56" |
| Cooling Unit | • Hermetically sealed compressor • Evaporator fitted with high flow rate fan for maximum cooling efficiency • Ecological refrigerant R404A • Manual defrosting device and evaporation system of water condensation without electrical energy |
$100.00
| Project Features | • Only Piper's equipment has the advantage of FoodSafe technology and certification. This ensures that your food is kept "out of the DANGER-ZONE." Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F "DANGER-ZONE." Since there is no simple way of knowing when the degree of contamination has risen to a level which could result in illness or death, chilling or freezing food rapidly is the only FoodSafe answer. FDA and HACCP Regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish. Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens. Nothing does it better than FoodSafe |
|---|---|
| Internal Fitting | • Stainless steel 18/10 glide supports joint fixed in the sides of the cooling compartment • Distance between the slides couples is 2.56" |
| Cooling Unit | • Hermetically sealed compressor • Evaporator fitted with high flow rate fan for maximum cooling efficiency • Ecological refrigerant R404A • Manual defrosting device and evaporation system of water condensation without electrical energy |
$100.00
| Project Features | • Only Piper's equipment has the advantage of FoodSafe technology and certification. This ensures that your food is kept "out of the DANGER-ZONE." Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F "DANGER-ZONE." Since there is no simple way of knowing when the degree of contamination has risen to a level which could result in illness or death, chilling or freezing food rapidly is the only FoodSafe answer. FDA and HACCP Regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish. Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens. Nothing does it better than FoodSafe |
|---|---|
| Internal Fitting | • Stainless steel 18/10 glide supports joint fixed in the sides of the cooling compartment. • Distance between the slides couples is 2.56" |
| Cooling Unit | • Hermetically sealed compressor • Evaporator fitted with high flow rate fan for maximumcooling efficiency • Ecological refrigerant R404A • Manual defrosting device and evaporation system of water condensation without electrical energy |
$100.00
| Project Features | • Only Piper's equipment has the advantage of FoodSafe technology and certification. This ensures that your food is kept "out of the DANGER-ZONE." Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F "DANGER-ZONE." Since there is no simple way of knowing when the degree of contamination has risen to a level which could result in illness or death, chilling or freezing food rapidly is the only FoodSafe answer. FDA and HACCP Regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish. Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens. Nothing does it better than FoodSafe |
|---|---|
| Electrical Control Board | • Electronic control board equipped with display, which shows the status of the appliance in every moment. • The microprocessor is able to memorize till 100 programs. • The "T" electronic control can memorize eventual alarms, and can control up to 4 core probes or 4 sensors Defrosting with activation of an electric heating element fitted on the evaporator • Compressor protected by overload cut-out with automatic reset Microswitch cuts out the evaporator fan and compressor when the door is opened. |
| Internal Fitting | • Stainless steel 18/10 glide supports joint fixed in the sides of the cooling compartment. • Distance between the slides couples is 2.56" • Manual defrosting device and evaporation system of water condensation without electrical energy |
$100.00
| Project Features | • Only Piper's equipment has the advantage of FoodSafe technology and certification. This ensures that your food is kept "out of the DANGER-ZONE." Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F "DANGER-ZONE." Since there is no simple way of knowing when the degree of contamination has risen to a level which could result in illness or death, chilling or freezing food rapidly is the only FoodSafe answer. FDA and HACCP Regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish. Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens. Nothing does it better than FoodSafe |
|---|---|
| Cooling Unit | • Hermetically sealed compressor • Evaporator fitted with high flow rate fan for maximumcooling efficiency • Ecological refrigerant R404A • Manual defrosting device and evaporation system of water condensation without electrical energy |
| Internal Fitting | • Stainless steel 18/10 glide supports joint fixed in the sides of the cooling compartment. • Distance between the slides couples is 2.56" • Manual defrosting device and evaporation system of water condensation without electrical energy |
$100.00
| Project Features | • Only Piper's equipment has the advantage of FoodSafe technology and certification. This ensures that your food is kept "out of the DANGER-ZONE." Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F "DANGER-ZONE." Since there is no simple way of knowing when the degree of contamination has risen to a level which could result in illness or death, chilling or freezing food rapidly is the only FoodSafe answer. FDA and HACCP Regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish. Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens. Nothing does it better than FoodSafe |
|---|---|
| Internal Fitting | • Stainless steel 18/10 glide supports joint fixed in the sides of the cooling compartment. • Distance between the slides couples is 2.56" |
| Cooling Unit | • Hermetically sealed compressor • Evaporator fitted with high flow rate fan for maximumcooling efficiency • Ecological refrigerant R404A • Manual defrosting device and evaporation system of water condensation without electrical energy |
$100.00
| General Features | • Monoblock construction • Outside side-panels and top in stainless steel (Scotch-Brite satin-finish) • Insulated stainless steel door with Scotch-Brite satin finish • Inside bottom and floor die-formed leakproof • Insulation in high-density (93 lbs) expanded polyurethane, 2.36" thick, HCFC-free • Copper evaporator coil with aluminum fins protected against corrosion with an electronically applied epoxypaint 20 microns thick • Copper condenser with aluminium fins at high thermic efficiency • Anti-condensation heating element in the body, below the magnetic gasket • Full length ergonomic handle and magnetic gasket on all four sides of the door • Stainless steel feet 2" with adjustable height 5.91-7.09" • Self-closing doors with stop in open position at 100° • Heated core probe standard (in blast freezers) for easy extraction • Electro-Fin (coating to protect fins from corrosion) |
|---|---|
| Internal Fitting | • Stainless steel 18/10 glide supports joint fixed in the sides of the cooling compartment. • Distance between the slides couples is 2.56" |
| Cooling Unit | • Hermetically sealed compressor • Evaporator fitted with high flow rate fan for maximumcooling efficiency • Ecological refrigerant R404A • Manual defrosting device and evaporation system of water condensation without electrical energy |
$100.00
| General Features | • Monoblock construction • Outside side-panels and top in stainless steel (Scotch-Brite satin-finish) •Insulated stainless steel door with Scorth-Brite satin finish • Inside bottom die-formed leakproof • Insulation in high-density (93 lbs) expanded polyurethane, • 2.36" thick, HCFC-free • Copper evaporator coil with aluminum fins protected against corrosion with an electronically applied epoxy paint 20 microns thick • Copper condenser with aluminium fins at high thermic efficiency • Anti-condensation heating element in the body, below the magnetic gasket • Full length ergonomic handle and magnetic gasket on all four sides of the door • Stainless steel feet 2.25" diameter with adjustable height from 3"-5.25" • Self-closing door locking in open position at 100°. • Heated core probe standard (in blast freezers) for easy extraction • Electro-Fin (coating to protect fins from corosion) |
|---|---|
| Internal Fitting | • Shelves slot-in supports made of stainless steel, extractable without using any tools for easy internal cleaning. Interstep between the slides 3.15" |
| Cooling Unit | • Hermetically sealed compressor • Evaporator fitted with high flow rate fan for maximum cooling efficiency • Ecological refrigerant R404A. • Manual defrosting device and evaporation system of water condensation without electrical energy |
$100.00
| Product Details | • The modular RIP-1 proofing cabinet adapts to meet your needs. Use either roll-in or reach-in racks to accommodate varied bakery production and add additional units as your needs grow |
|---|---|
| Standard Features | • Can accommodate one roll-in bread rack or has 16 wire shelves adjustable on 3 inch centers to hold 18" x 26" sheet pans • Individual heat and humidity controls provides precise control over proofing environment • Individual heat controls go from 0° to 125° (optional 225°) • High volume blowers Circulates heat and humidity efficiently • Standard automatic humidity Eliminates manualfill water pan • Full-view glass door provides sight-proofing • Heavy-duty cabinet construction and stainless steel finish – interior and exterior – provides long life and easy maintenance |
| Construction | • The proofer’s interior and exterior shall be constructed of 20 gauge stainless steel. Corner posts constructed of 18 gauge stainless steel. The proofer shall have two thermostatically controlled 750 watt elements for creating heat and an infinitely controlled humidistat 1250 watt burner element for creating moisture. Proofer shall be brightly lit providing sight merchandising • Proofer shall have two individual circuit breakers. One for the proofer thermostat and heat element. One for the humidity infinite switch and burner element and the proofer lights |
$100.00
Search
Product Type
- Heating & Holding Cabinets (1)
- Oven Proofer Combos (6)
- Ovens (8)
- Proofers (5)
- Refrigeration & Freezing (15)
- Rotisseries (3)
- Slicers (4)
Brands
Products
- Food Equipment (289)
- Parts & Supplies (29)
- Specials (2)