1433 and 1433FH 1 × $100.00
Stainless Steel Quad Tub Dolly 1 × $100.00
B300M Gravity Feed manual Slicer 1 × $100.00Subtotal: $300.00
1433 and 1433FH 1 × $100.00Stainless Steel Quad Tub Dolly 1 × $100.00B300M Gravity Feed manual Slicer 1 × $100.00Subtotal: $300.00
| Construction | • Stainless steel welded frame, panels, doors • Casters (plated body) with 5” (127mm) diameter Prevenz anti-microbial wheels • Stainless steel surplus tray. |
|---|---|
| Cutting Blades | • Two special hardened Stainless Steel sickle style Blades are supplied with each machine. • Select two blades – standard smooth edge or serrated edge Blades. |
| Slice Controller | • Electronic • splash proof • User friendly Key Pad (English or Metric) (tactile and audible) • up to 7 Programable Programs • Auto transport return |
| Construction | • Stainless steel welded frame, panels, doors • Casters (plated body) with 5” (127mm) diameter Prevenz anti-microbial wheels • Stainless steel surplus tray |
|---|---|
| Cutting Blades | • Two special hardened Stainless Steel sickle style Blades are supplied with each machine. • Select two blades – standard smooth edge or serrated edge Blades |
| Slice Controller | • Main on/off Switch • Run or jog switch • Push button start switch • Manual transport return |
| Construction | • Stainless steel feed pan and polished stainless steel case, cast iron hot tin-dipped bowl assembly, size 32 |
|---|---|
| Drive System | • Pre-lubricated chain drive |
| Standard Features | • 11” (280 mm) aluminum legs, stomper, ring wrench, welded bowl guard on feed pan, operating and safety manual |
| Construction | • Stainless steel feed pan and polished stainless steel case, cast iron hot tin dipped bowl, ring and auger, size 32 |
|---|---|
| Switch and Interlock | • Magnetic contactor with waterproof push buttons mounted on right side of machine (factory installed) when facing bowl and feed pan interlock. Push buttons can be optionally mounted on left side of the stainless steel case |
| Standard Features | • 4” aluminum legs, splash guard, stomper, stainless steel welded bowl guard on feed pan, operating and safety manual |
| Construction | • Cast aluminum base |
|---|---|
| Drive System | • HTD (high-torque drive) steel wire power grip belt, 95% efficiency rated, non corrosive, no lubrication required |
| Standard Features | • Stomper, operating and safety manual, • 6 foot cord and plug all single phases • 6 foot cordless plug all three phase |
| Construction | • Case: mirror finish stainless steel |
|---|---|
| Drive System | • HTD (high-torque drive) steel wire power grip belt, 95% efficiency rated, non corrosive, no lubrication required |
| Standard Features | • Stomper, operating and safety manual, 6 foot cord, and plug all single phase. 6 foot cordless plug all three phase |
| Construction | • Case: mirror finish stainless steel |
|---|---|
| Drive System | • HTD (high-torque drive) steel wire power grip belt, 95% efficiency rated, non corrosive, no lubrication required |
| Standard Features | • Stomper, operating and safety manual, 6 foot cord, and plug all single phase. 6 foot cordless plug all three phase |
| Construction | • Body- Anodized Polished Aluminum Cast with Non-Corrosive Metal Frame |
|---|---|
| Standard Features | • Automatic spring loaded belt tensioning • Polygroove belt drive provides optimum performance • Blade protective ring guard prevents exposed blade edge during cleaning, Removable product table for easier cleaning • Thermal overload/no volt release prevents accidental turn on after power outages • Green pushbutton on-off control and Red e-stop button • Water resistant IP 65 motor, wiring harness, electronic controls & connectors • Detachable sharpener assembly – helps provide hygienic slicing area • Product fence – for use on narrow products, 6-1/2′ Power Cord with 60 Hz – 115V • 3 prong molded plug – No plug on 50 Hz |
| Construction | • Body – Anodized polished aluminum cast with non-corrosive metal frame |
|---|---|
| Standard Features | • Blade 13¾” (350mm) Hollow ground alloy steel (240 rpm) • Slice thickness adjustable 0-1” (0-25mm) • Maximum product cut, Round 9¼” (235mm) • Maximum product cut, Square 7 7/8 x 7 7/8” (200mm x 200mm) • Maximum product cut, Rectangle 11¾ x 6” (298mm x 152mm) • Automatic spring loaded drive belt tensioning • Blade protective ring guard prevents exposed blade edge during cleaning • Tilt-away product table lockout prevents thickness gauge from opening during cleaning • Thermal overload/no volt release prevents accidental turn on after power outages • Poly groove belt drive providing optimum performance • Water resistant IP65 motor, wiring harness and electronic controls • Product fence-for use on narrow products • Stainless steel product end weight • Detachable sharpener. |
| Construction | • Body – Anodized polished aluminum cast with non-corrosive metal frame |
|---|---|
| Standard Features | • Blade 13¾” (350mm) Hollow ground alloy steel (240 rpm) • Slice thickness adjustable 0-1” (0-25mm) • Maximum product cut, Round 9¼” (235mm) • Maximum product cut, Square 7 7/8 x 7 7/8” (200mm x 200mm) • Maximum product cut, Rectangle 11¾ x 6” (298mm x 152mm) • Automatic spring loaded drive belt tensioning • Blade protective ring guard prevents exposed blade edge during cleaning • Tilt-away product table lockout prevents thickness gauge from opening during cleaning • Thermal overload/no volt release prevents accidental turn on after power outages • Poly groove belt drive providing optimum performance • Water resistant IP65 motor, wiring harness and electronic controls • Product fence-for use on narrow products • Stainless steel product end weight • Machine lift handle to allow cleaning table under the machine • Detachable sharpener. |
| Construction | • Body- Anodized Polished Aluminum Cast with Non-Corrosive Metal Frame |
|---|---|
| Standard Features | • Automatic spring loaded belt tensioning • Polygroove belt drive provides optimum performance • Blade protective ring guard prevents exposed blade edge during cleaning • Tilt-away product table lockout prevents thickness gauge from being opened during cleaning • Thermal overload/no volt release prevents accidental turn on after power outages • Green pushbutton on-off control and Red e-stop button • Water resistant IP 65 motor, wiring harness, electronic controls & connectors • Detachable sharpener assembly – helps provide hygienic slicing area • Product fence – for use on narrow products • 6-1/2′ Power Cord with 60 Hz – 115V • 3 prong molded plug – No plug on 50 Hz |
| Model | • 548SS, 552SS, 7548SS, 7552SS, 1056SS, 1556SS Grinders (Chopper/Mincer) |
|---|---|
| Construction | • Stainless steel feed pan and polished stainless steel case, Cast iron hot tin dipped bowl, ring, and auger |
| Drive System | • Silent (10-15 HP) or Roller link (5, 7.5 HP) chain drive over wide face sprockets insuring maximum power transfer from motor to auger |
| Standard Features | • Aluminum legs on 5 & 7.5 HP, Plated Steel legs on 10 & 15 HP, spurt guard, stomper, ring wrench, bowl guard on feed pan, operating and safety manual |